Tuesday, September 25, 2012

GTM AC Compressor Shield


<< Cockpit/Tunnel Aluminum (Rear)   Front/Center Undercarriage Aluminum >>

Major System Category: AC & Cooling System
Task: Install AC Compressor Shield
Parts:
Prerequisite Tasks: Sound Proof  Rear Tunnel
Additional Costs: N/A
Time Requirement: 30 Minutes
Date Started: August 25, 2012
Date Completed: August 25, 2012
This is the cut out as delivered with the kit. Orientation: Passenger side, behind the firewall.
The compressor shield is thick chunk of metal that covers the hole in the panel facing the passenger side fuel tank. This really simple. Drill five holes and set five rivets. The important thing is to get this finished before mounting the fuel tanks. No one wants to undo the fuel tanks once they are installed. I also sound proofed the area.
Same area with the sound proofing and shield installed.

1 comment:

  1. The AC Compressor consists of the compressor itself and the clutch assembly. The compressor has 2 ports, and inlet and outlet, or 'suction' and 'discharge' respectively. The suction port is always the larger diameter hole. Refrigerant is 'sucked' into the compressor, compressed, and 'discharged' through the outlet, headed for the condenser.

    AC Compressor

    ReplyDelete

Search Engine Submission - AddMe